023400 - Dodge - P4B-DI-208RE DBL INTERLOCK

Dodge Type E-Xtra, K, DI, TAF and EXL double row tapered roller bearings have the capacity to carry heavy radial loads and combined radial and thrust loads. The maximum recommended load which can be applied is limited by various components in the system such as bearing, housing, shaft, shaft attachment, speed and life requirements as listed in this catalog. Dodge tapered roller bearings have been applied successfully even when these limits have been exceeded under controlled operating conditions. Dodge Pillow Block Roller Bearing Unit, Double-Interlock Type K, Series: 207 Series, 2-1/2 in Bore Dia, 9-1/4 to 10-1/4 in Bolt Center-to-Center Length, 3-1/4 in Base to Bore Centerline, 12 in Overall Length, 4 in Overall Width, 7.03 in Overall Height, Four-Bolt Base Mount, Tapered Bore Type, 3.38 in Base Width, 65 deg Setscrew Locking Device, Triple Lip Seal, Expansion Expansion Type, 10600 lb Dynamic/54000 lb Static, 2420 rpm Maximum, Cast Iron, Black Oxide Factory assembled, adjusted and pre-lubricatedCase hardened rollers and racesEasy installation and maintenanceSingle rubber lip contacting seals